10 шт. 2.4 ГГц заменить модель RC приемник радиоуправляемая модель IPEX Разъем антенный Coax для FrSky FS Futaba Sanwa RC части

Описание

We are a large business company, a professional product team.If you need a large number of products, or need other products. Please contact me.We will give you a favorable price.Looking forward to your advice.

10PCS 2.4Ghz replace Model rc receiver RC model ipex plug coax antenna for FrSky FS FUTABA SANWA rc parts

specification.

Please Pay Attention:

All Frsky receiver default antenna is black color from middle of 2015. The other length is still gray color, such as 250mm, 400mm, 600mm.

The prior stocked gray color antenna were stock cleared, all the new order is shippng black color after Spetember 2015.

- Antenna Length: 150mm

- Connector type: Ipex female connector

- Frequency: 2.4Ghz

- Compatibility: FrSky receiver, and all other 2.4Ghz receiver if with ipex connector for replacement

NOTE：Some 2.4G remote control plug may be directly welded to the circuit board, only need to replace the antenna plug cut off, re-welding up.

For Your Information:

Frsky/Futaba receiver is two antenna with diversity function, only one better signal receiver antenna working at same time, pls note the antenna location:

a. The two antennas must be kept as straight as possible. Otherwise it will reduce the effective range.

b. The two antennas should be placed at 90 degrees to each other

This is not a critical figure. But the most important thing is to keep the antennas away from each other as much as possible.

c. The antennas must be kept away from conductive materials, such as metal and carbon by at least a half inch. The coaxial part of the antennas does not need to follow these guidelines, but do not bend it in a small radius.

d. Keep the antennas away from the motor, ESC, and other noise sources as much as possible.